Difference between revisions of "Support Agent"

From Bisq Wiki
Jump to navigation Jump to search
Line 95: Line 95:
  
 
===Case tracking===
 
===Case tracking===
 +
 +
==Knowledge base for support==
  
 
===Trade transaction structure===
 
===Trade transaction structure===
Line 158: Line 160:
 
If network speed is very low (< 2 Mbit/sec) there might be connection timouts. We improved some data requests already and will improve more in upcoming releases but specially at startup the BTC sync and getData requests can be a bit heavy, specially if Bisq was not used for a while. Doing repeated startups can help as some data gets persisted and at next request less data is required. Using a local Bitcoin node helps as well as the BTC sync is then not adding up to tor traffic.
 
If network speed is very low (< 2 Mbit/sec) there might be connection timouts. We improved some data requests already and will improve more in upcoming releases but specially at startup the BTC sync and getData requests can be a bit heavy, specially if Bisq was not used for a while. Doing repeated startups can help as some data gets persisted and at next request less data is required. Using a local Bitcoin node helps as well as the BTC sync is then not adding up to tor traffic.
 
If the user has not used Bisq since more then a month he should update to latest version and then delete some files in the `db` directory inside the data directory. Then those files get replaced by more recent ones which go shipped with the latest binary. that avoids to need to download the missing data from seed nodes (seed nodes have limits as well of amount of delivered data). Those files are:
 
If the user has not used Bisq since more then a month he should update to latest version and then delete some files in the `db` directory inside the data directory. Then those files get replaced by more recent ones which go shipped with the latest binary. that avoids to need to download the missing data from seed nodes (seed nodes have limits as well of amount of delivered data). Those files are:
- `DaoStateStore`
+
* DaoStateStore
- `SignedWitnessStore`
+
* SignedWitnessStore
- `AccountAgeWitnessStore`
+
* AccountAgeWitnessStore
- `BlindVoteStore`
+
* BlindVoteStore
- `ProposalStore`
+
* ProposalStore
  
 
Please note that deleting or manipulating files inside the db directory is usually not recommended and can cause severe problems! Some files are basically only cache files from public data like the ones above, those are not critical, but other data are local private data and would lead to a corrupted state or failed trades.
 
Please note that deleting or manipulating files inside the db directory is usually not recommended and can cause severe problems! Some files are basically only cache files from public data like the ones above, those are not critical, but other data are local private data and would lead to a corrupted state or failed trades.
  
### BTC Balance issues Connection issues  
+
'''BTC Balance issues Connection issues'''
 
There is a wallet info tool which can be opened with cmd+j. There you see all the raw data of the wallet: Addresses, public and private keys, txs, balance of both BTC and BSQ. Can be useful for investigation.
 
There is a wallet info tool which can be opened with cmd+j. There you see all the raw data of the wallet: Addresses, public and private keys, txs, balance of both BTC and BSQ. Can be useful for investigation.
 
Another option is the open the emergency wallet tool by cmd+e. There one can withdraw all available funds (not including locked up funds in multisig). The displayed balance there is the sum of
 
Another option is the open the emergency wallet tool by cmd+e. There one can withdraw all available funds (not including locked up funds in multisig). The displayed balance there is the sum of
Line 185: Line 187:
 
- Every db and wallet file has a backup folder with the rolling backups. They are named with the unix epoch timestamp. Replace an existing file with a backup file should be done only in emergency cases and only if dev gives the advice.
 
- Every db and wallet file has a backup folder with the rolling backups. They are named with the unix epoch timestamp. Replace an existing file with a backup file should be done only in emergency cases and only if dev gives the advice.
  
### Start over with a new data directory
+
'''Start over with a new data directory'''
 
See https://bisq.community/t/how-to-switch-to-a-new-data-directory/7583 for more details
 
See https://bisq.community/t/how-to-switch-to-a-new-data-directory/7583 for more details
  
### Logs
+
'''Logs'''
 
Log files are pretty verbose and a big hard to interpret for no developers but a few useful information can be easily extraced:
 
Log files are pretty verbose and a big hard to interpret for no developers but a few useful information can be easily extraced:
 
If you search for `VERSION=` you can see the users version. It gets logged at startup. If the user has once updated there must never follow a lower version in flater log entries. Downgrade is not supported and caused severe problems at the segwit update. After 1.5.0 we protect that downgrade is not possible, but will only have affect in next version after 1.5.0.
 
If you search for `VERSION=` you can see the users version. It gets logged at startup. If the user has once updated there must never follow a lower version in flater log entries. Downgrade is not supported and caused severe problems at the segwit update. After 1.5.0 we protect that downgrade is not possible, but will only have affect in next version after 1.5.0.
Line 194: Line 196:
  
  
### References
+
'''References'''
  
 
[1] Bisq donation addresses:
 
[1] Bisq donation addresses:

Revision as of 22:21, 16 December 2020

Requirements

What makes a great support agent?

  • You're a Bisq user. You understand how to use it well enough to help others.
  • You can be available for 10 hours or more per week to handle support cases.
  • You're familiar with the existing Docs and Knowledge Base articles.

If you're interested in becoming a support agent, see the #Internship section below.

Infrastructure

Includes all of Support Team#Infrastructure, plus the following:

Coverage calendar

The coverage calendar tracks shifts for each support agent, with the goal of achieving 24/7 coverage.

Case tracking board

GitHub team

Role issue

Duties

Handle support cases

If unable to solve the trade successfully you must gather the appropriate data before contacting a developer.

Required data to request support from developers:

  • Create a directory with the trade ID as name
  • Add a short description in a plain text file of the problem/bug. Use BTC buyer/BTC seller if you refer to any trader. Ask user when the issue happened so its easier to find the issue in the logs.
  • Ask them if they have done anything non-standard or had past issues.
  • Add all available trade tx IDs of both traders as plain text to the report.
  • Get a screenshot of the trade details window (click on trade ID). Tell users to only blur out the payment account details but not the tx IDs or other data. There is no relevant privacy issue with exposing trade ID, tx IDs or onion address.
  • Add a screenshot from the mediators dispute details window. The contract as json data is not required initially and only needed if the dev requests it. The payment account data in the json file should be removed before handing over to a dev to protect traders privacy.
  • Get all log files from both users (at Account/Backup there is a button for opening the data dir) - its up to 11 files.
  • Put all logs from one user into a directory named buyer and seller
  • Add a screenshot of both traders first chat message (system message containing data like version number/OS,...)
  • If there have been any error/warning popups request a screenshot of that as well.
  • Zip all and send it in keybase as PM to a dev who has commited to work on it. Avoid adding it to the support channel as then nobody will feel responsible to work on it.

Keep the coverage calendar up to date

Submit regular cycle reports

Rights


Policies

Time to response

If you are on duty, it's your job to respond as promptly as possible to incoming user requests. The goal is to respond to all support inquiries in the #support channel within 1 hour of being asked and preferably much faster. This initial response need not actually resolve the user's issue, it is merely letting the user know that you've heard their question and that you'll be their primary support agent for this case.

Sensitive user data

Often support agents will need to ask users to share their logs with you or specific information about their offer or trade, such as trade ID, trade amounts, etc. This data should not be shared in any public channel and should be destroyed one month after the case is closed. Note that any such information that shared in the bisq.support subteam is automatically destroyed after 30 days.

Processes

Internship

Prospective support agents are asked to go through an internship process that lasts one DAO cycle (approximately one month). During this period, you'll perform the duties of a support agent, but your contributions won't be eligible for compensation. This gives you a chance to get to know the ropes and for all parties involved to determine whether a support agent role is a good fit for you.

  1. Indicate in the #support channel that you're interested in interning as a Support Agent.
    • Say a bit about yourself and why you're interested in doing this work
    • Mention what days and times you'll be available to do this work
  2. The Support Team Lead will then:
  3. After one full cycle of interning

Using the coverage calendar

Case tracking

Knowledge base for support

Trade transaction structure

If there are any issues with transactions or doubt if the deposit or delayed payout tx is correct you can check it in a block explorer by following the transactions outputs.

There are 5 diff. txs:

  • Maker fee tx
  • Taker fee tx
  • Deposit tx
  • Delayed payout tx (only get broadcast when arbitration gets opened)
  • Payout tx

The 2 trade fee txs have as first output the trade fee. That goes either to one of the BTC receiver addresses ([1] and [2]) or to a BSQ change address of the user in case BSQ was used for the fee (the diff from BSQ input and change output is used for miner fee and is the burned BSQ). The second output of both trade fee txs must lead to the (same) deposit tx. The deposit tx has an OpReturn and the first output is to a multiSig address (start with `3` if non-segwit or with `bc1` if segwit). There can be an optional change output if trade amount was smaller than max. offer amount, but there are never more then 2 outputs + opReturn. If the delayed payout tx or the normal payout tx was published you see that the first output of the deposit tx (the MS output) is spent and lead to one of those txs as the single input. The normal payout tx has exactly 2 outputs, 1 address for each trader and that addresses are dispayed in the trade/ticket details. The delayed payout tx need to have exactly 1 input and 1 output to one of the addresses listed in [1] and [3]. If arbitration is opened this tx MUST exist otherwise a refund MUST NOT be made. The input must be the multisig output of the deposit tx (we have a code to check if its the deposit tx of the trade and not any past one - if a popup in mediation or arbitration tells you that there is an issue, take it serious and contact devs for advice).

To check the txs (and addresses) use a block explorer which shows clearly the inputs and outputs, not all explorers have a very intuitive UI to follow the flows of txs. If you select the addresses like in the below screenshot you can see the flow pretty clearly.

Support Agent guidance 1.png
Support Agent guidance 3.png
Support Agent guidance 4.png


Checking if the trade fee tx leads to the deposit tx helps to quickly see if the trade funds are locked up and all is ok with the trade. If that is not the case the traders might have lost trade fee (if their trade fee tx is published - if one side is missing that user has not lost trade fee so no fee reimbursement is justified, such users need to do a SPV resync as the tx is likely committed in their wallet but not in the mempool due to too low fees or a bug at broadcast).


One trade fee tx not found in mempool

In case the miner fee was too low or due broadcast problems (bad network connectivity or bug) it can be that one of the trade fee txs is not getting confirmed or has not been broadcast. After a few days unconfirmed tx gets removed from the bitcoin nodes mempool (size of mempool is a local setting for each node/explorer so it can be that its visible in some explorers but in others not). In such cases the deposit tx cannot be confirmed as well. Instruct the trader who's tx was not confirmed that he does a SPV resync so that the tx gets cleaned from his local wallet. Otherwise there is high risk that the change output gets used for another tx and that will fail then as well. Best to deactivate all open offers to avoid that a taker could take an offer before the wallet is resynced. The trader who has the confirmed trade fee tx has lost his trade fee and can request for reimbursement.


SPV resync

SPV resync tends to be recommened too often in support. SPV resync can be quite heavy and is not a great user experience to do, so only recommend if really needed. How long a SPV takes depends on the age of the wallet and the number of transactions. Old wallets with many transactions can take a day or even more. Usually with a fresh empty wallet its about some minutes up to 1 hour. It is faster if the user runs a local BTC node (not pruned). It also depends on internet connection and amount of CPU/RAM. CPU will be maxed out during sync.

SPV resync is needed if there is a transaction in the wallet which never got confirmed. You can check for that by looking up the tx in several block explorers, if its not found in any then its pretty sure that tx got removed from mempool. This is expected in case miner fee was too low or when the tx broadcast failed. Another reason to do a SPV resync is when there is a message that the wallet contains a `double spend` tx. This is usually not intentional done by the user but due to some errors or reorgs in rare cases. There might be other more rare error conditions, but for those I recommend to contact the devs before recommending a SPV resync as it will help as well to fix potential bugs.

If users do not get connected to the BTC network do NOT recommend SPV resync. Potential reasons are:

  • User runs Bitcoin node in not pruned mode
  • Bitcoin node is not full synced when Bisq start (Bitcoin node need to always be full synced before starting Bisq)
  • User had set custom BTC node in settings or prog arg and has changed his setup
  • Connection issues
  • Tor issues

Connection issues

In rare cases Tor can cause problems. If no connection can be created after several restarts and if user is sure to have normal connectivity he should clean the Tor files via `Settings/Network/Tor settings`. He should make a backup first and not do it manually. Deleting the hiddenservice directory would make his node inaccessible as he would create a new onion address! If there are no open offers/trades/disputes and user dont care to lose his local reputation it is not problematic to delete the onion priv key. In some rare cases that can help as well (I saw in rare cases the changing the onion address solved Tor connection issues). Tor has some ddos protection which can lead to get flagged an IP address. We see that from time to time on seed nodes and its likely caused by too much traffic or some traffic pattern which Tor interprets as ddos. In such cases changing the IP should help. Using a VPN can help to check if thats the problem (I had it once myself that I could not use Tor anymore and only via VPN it worked). After a few weeks it was ok again so it seems those bans fade out over time. Testing with Tor browser is another option to see if Tor itself has issues (does not cover issues if the onion address or cache files).

If network speed is very low (< 2 Mbit/sec) there might be connection timouts. We improved some data requests already and will improve more in upcoming releases but specially at startup the BTC sync and getData requests can be a bit heavy, specially if Bisq was not used for a while. Doing repeated startups can help as some data gets persisted and at next request less data is required. Using a local Bitcoin node helps as well as the BTC sync is then not adding up to tor traffic. If the user has not used Bisq since more then a month he should update to latest version and then delete some files in the `db` directory inside the data directory. Then those files get replaced by more recent ones which go shipped with the latest binary. that avoids to need to download the missing data from seed nodes (seed nodes have limits as well of amount of delivered data). Those files are:

  • DaoStateStore
  • SignedWitnessStore
  • AccountAgeWitnessStore
  • BlindVoteStore
  • ProposalStore

Please note that deleting or manipulating files inside the db directory is usually not recommended and can cause severe problems! Some files are basically only cache files from public data like the ones above, those are not critical, but other data are local private data and would lead to a corrupted state or failed trades.

BTC Balance issues Connection issues There is a wallet info tool which can be opened with cmd+j. There you see all the raw data of the wallet: Addresses, public and private keys, txs, balance of both BTC and BSQ. Can be useful for investigation. Another option is the open the emergency wallet tool by cmd+e. There one can withdraw all available funds (not including locked up funds in multisig). The displayed balance there is the sum of the available balance + reserved in offers balance.

It is not recommended to use the BTC private keys outside of Bisq. It always can be recovered from Bisq. I am not aware of any case where funds got lost. Spending BTC outside of Bisq can lead to failed taker offer attempts, failed trades or double spends in Bisq and can screw up the wallet. For those who still want to do it here are the HD wallet paths: BTC wallet segwit path is: M/44H/0H/1H BTC wallet legacy path is: M/44H/0H/0H BSQ wallet path is: M/44H/142H/0H

BSQ should never be used outside of Bisq as the risk to burn the BSQ is very high. A BSQ tx has very strict rules how it is constructed and small mistakes lead to lost BSQ.

Backup

- If a user reports a bug tell user to make a backup of data dir. This can help that relevant log files and rolling backups are still available later. Rolling backup means that old files get deleted (e.g. bisq10.log is oldest log file) once the max. number files is reached, so we can only go back a certain depth back in history. - Tell users to always make a full backup of the data dir. Seed node is only an emergency backup and if there are open trades funds are at risk (e.g. no communication possible with mediator/peer, or manual payout required). - Every db and wallet file has a backup folder with the rolling backups. They are named with the unix epoch timestamp. Replace an existing file with a backup file should be done only in emergency cases and only if dev gives the advice.

Start over with a new data directory See https://bisq.community/t/how-to-switch-to-a-new-data-directory/7583 for more details

Logs

Log files are pretty verbose and a big hard to interpret for no developers but a few useful information can be easily extraced: If you search for `VERSION=` you can see the users version. It gets logged at startup. If the user has once updated there must never follow a lower version in flater log entries. Downgrade is not supported and caused severe problems at the segwit update. After 1.5.0 we protect that downgrade is not possible, but will only have affect in next version after 1.5.0. If you look for an error search for ERROR (all uppercase). But as there are some non critical errors as well (e.g. caused from broken connections) its better to leave that interpretation to devs. If you post errors post the stacktrace as well if it is available or at least a few log lines before and after the error so it is easier to get an idea what caused it.


References

[1] Bisq donation addresses: Current Bisq fee receiver address: 38bZBj5peYS3Husdz7AH3gEUiUbYRD951t Past fee receiver/donation addresses: 1BVxNn3T12veSK6DgqwU4Hdn7QHcDDRag7, 3EtUWqsGThPtjwUczw27YCo6EWvQdaPUyp, 3A8Zc1XioE2HRzYfbb5P8iemCS72M6vRJV

[2] Fee receiver addresses of victims from security incident: 1EKXx73oUhHaUh8JBimtiPGgHfwNmxYKAj 1HpvvMHcoXQsX85CjTsco5ZAAMoGu2Mze9 3EfRGckBQQuk7cpU7SwatPv8kFD1vALkTU 13sxMq8mTw7CTSqgGiMPfwo6ZDsVYrHLmR 19qA2BVPoyXDfHKVMovKG7SoxGY7xrBV8c 19BNi5EpZhgBBWAt5ka7xWpJpX2ZWJEYyq

[3] New receiver address for delayed payout tx (no DAO param change yet done but will be activated soon): 34VLFgtFKAtwTdZ5rengTT2g2zC99sWQLC





Escalation

Reporting

Compensation